Hikvision IP camera DS-2CD1121-I F2.8
Description
Once logged in to admin panel please configure FTP settings as follows:
Configuration -> Network -> Advanced settings -> FTP
Enter details you found in camlocus and click Save.
Then go to Event -> Basic Event -> Tick Enable Motion Detection and click Save.
Finally go to Storage -> Schedule Settings -> Capture Schedule Continuos (Select All) -> Capture Parameters -> Enable Timing Snapshot and Enable Event-Triggered Snapshot -> Click Save.
Specifications:
Camera
Image Sensor
1/2.8\" progressive scan CMOS
Min. Illumination
Color: 0.01Lux @(F1.2,AGC ON),0 Lux with IR
Shutter Speed
1/3s to 1/100,000 s, supportslow shutter
Lens
2.8 mm @F2.0, horizontal field of view 105°, 4 mm @F2.2, horizontal field of view 84° 6 mm @F2.0, horizontal field of view 55°
Lens Mount
M12
Day &Night
IR cut filter with auto switch
2-Axis Adjustment
Pan: 0° to 355°, tilt: 0°to 70°
DNR(Digital Noise Reduction)
3D DNR
WDR(Wide Dynamic Range)
Digital WDR
Compression Standard
Video Compression
Main stream: H.264+/H.264 Sub stream: H.264/MJPEG
H.264 Type
Baseline profile/Main profile
Video Bit Rate
32 Kbps to 8 Mbps
Image
Max. Resolution
1920 × 1080
Main Stream Max. Frame Rate
50Hz: 25fps @(1920 × 1080, 1280 × 960, 1280 × 720)
60Hz: 30fps @(1920 × 1080, 1280 × 960, 1280 × 720)
Sub-stream Max. Frame Rate
50Hz: 25fps @(704 × 576, 640 × 480, 352 × 288,320 × 240)
60Hz: 30fps @(704 ×480, 640 × 480, 352 × 240,320 × 240)
Image Settings
Brightness, saturation, contrast, sharpness are adjustable via web browser or client software
Day/Night Switch
Support auto, scheduled
Others
Mirror, BLC (area configurable), region of interest (support 1 fixed region)
Network
Network Storage
NAS (NFS,SMB/CIFS)
Detections
Motion detection
Alarms
Video tampering, network disconnected, IP address conflicted
Protocols
TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP, NTP,UPnP,SMTP,IGMP,802.1X,QoS,IPv6, Bonjour
Standard
ONVIF(PROFILE S,PROFILE G),PSIA,CGI,ISAPI
General Function
One-key reset, anti-flicker, heartbeat, mirror, password protection, privacy mask, watermark, IP address filter
Interface
Communication Interface
1 RJ45 10M/100M self-adaptive Ethernet port
Reset
Support
General
Operating Conditions
-30 °C to60 °C (-22 °F to140 °F), humidity: 95% or less (non-condensing)
Power Supply
12V DC± 25%, PoE (802.3af)
Power Consumption
Max. 5 W
Protection Level
IP67, IK10
IR Range
Up to 30 m
Dimensions
Φ111 mm × 82 mm (4.4\" × 3.2\")
